Stir well for at least 3 minutes. Try not to incorporate air in to the system while mixing. Scrape the sides and the bottom to make sure you're being thorough (unmixed material will leave you with sticky spots that just won't cure). Once you mix the resin and hardener, you'll have about 45 minutes of working time before the resin thickens and starts to cure.
———————————————————————————————
Pour :
After making sure your piece is level, go ahead and pour Chimique Sol Art Resin over your work. Since it is self-leveling it will start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up. You'll notice bubbles will begin to rise to the surface. Most of the bubbles will pop on their own, as our resin is specially formulated to do so. You may use a hot air gun over unpopped bubbles if required.
———————————————————————————————
Wait :
Chimique Sol Art Resin needs to sit for several hours in a dust-free space while it cures. In about 8 hours it will be tacky but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured. It will be fully cured within 72 hours.
———————————————————————————————
Clean Up:
To reuse your mixing tools, wipe them down with Resin Clean solution before the resin dries.
