Flow Deep Pour Resin 2:1 | Deep Pour Epoxy Resin for Resin Art

Flow Deep Pour Resin 2:1 for Resin Art & Deep Casting

Flow Deep Pour Resin 2:1 by ArtOrnate is a low-viscosity deep pour epoxy resin designed for resin artists, makers and larger casting projects in India. Its self-leveling formulation helps create a smooth, clear, glossy finish while allowing bubbles to rise naturally during the pour.

Why Choose Flow Deep Pour Resin 2:1?

• 2:1 mixing ratio by weight for accurate resin and hardener measurement.
• Low-viscosity deep pour epoxy resin for deeper casting applications.
• Approx. 90 minutes working time after mixing.
• Self-leveling formulation for an even surface.
• Bubble-release formulation helps bubbles rise naturally; use a hot air gun carefully if required.
• Crystal-clear glossy finish for decorative and artistic projects.

Flow Deep Pour Resin Applications

Suitable for deep casting, resin art, decorative mould projects, statement artwork, wood-and-resin projects, river-style artwork and other larger resin pours where a lower-viscosity epoxy system is preferred.

Resin Pigments for Flow Deep Pour Projects

Create different resin effects with ArtOrnate pigment ranges:

• Opaque Pigments
• Mica Pigments
• Dual Tone Pigments
• Pearl Pigments
• Glow in Dark Pigments
• Morandi Pigments
• Alcohol Ink

How to Use Flow Deep Pour Resin 2:1

1. Measure resin and hardener accurately in a 2:1 ratio by weight.
2. Mix slowly and thoroughly for at least 3 minutes. Scrape the sides and bottom of the cup to reduce unmixed sticky areas.
3. Avoid incorporating unnecessary air while stirring.
4. Pour onto a properly levelled surface or suitable mould.
5. Allow bubbles to rise naturally. Use a hot air gun carefully only when necessary.
6. Keep the project clean and dust-free during curing.

Flow Deep Pour Resin Curing Time

Working time is approximately 90 minutes after mixing. Under suitable conditions, the resin may be tacky at around 12 hours, dry to touch at around 24 hours, approximately 95% cured within 36 hours and fully cured within 72 hours. Actual cure time varies with temperature, humidity, pour thickness and project conditions.

Available Pack Sizes

Flow Deep Pour Resin 2:1 is available in 1.5 kg, 3 kg, 4.5 kg, 7.5 kg, 10.5 kg and 15 kg pack sizes for individual artists and larger projects.

Flow Deep Pour Resin in India

ArtOrnate supplies resin art materials across India, with its store based in Ahmedabad, Gujarat. Shop Flow Deep Pour Resin 2:1 with compatible resin pigments, silicone moulds and other resin art supplies.

Frequently Asked Questions

What is the mixing ratio of Flow Deep Pour Resin?

The recommended mixing ratio is 2:1 by weight.

How long is the working time?

Approximately 90 minutes after resin and hardener are mixed, depending on project conditions.

Can I use pigments with Flow Deep Pour Resin?

Yes. Use compatible resin pigments according to their recommended addition level and test a small batch first.

How long does Flow Deep Pour Resin take to cure?

It may be dry to touch at around 24 hours and fully cured within approximately 72 hours under suitable conditions. Cure time varies with temperature, humidity and pour thickness.

How should I clean mixing tools?

Wipe reusable tools with a suitable Resin Clean Solution before the resin dries.

Safety & Best Practices

Work in a well-ventilated area, wear suitable gloves and protective equipment, avoid skin and eye contact, and follow the product packaging and safety instructions. Keep resin and hardener away from children and pets. For new applications, test a small batch before a large project.